Top Ten Ways to Protect Your Clothes from Mildew!

Because the climate where I live is relatively humid, I see many clients with mold/mildew issues in their homes, offices and in their closets.

As molds grow, they cause considerable damage. They leave a musty odor; they discolor fabrics; and sometimes they eat into them until the fabrics rot and fall to pieces. They also discolor leather, paper and plastic!


Mildew and mold have many similar characteristics, but they are different types of fungi, and are often different in color and texture. They both grow in similar moist, warm environments. Mold is more often found in foods, and mildew in paper, your shower and fabrics. However both can be found anywhere there is warm moisture. Mold is often black, green, red, or blue while mildew is usually gray or white (often a dusting of light dots).


Here is my Top Ten List: How to protect your clothes from fungus!


1) Protect your health first! Do NOT shake out anything that has mildew or mold on it, inside your house. You will just be spreading the spores. Take it outside. Sunshine and fresh air will kill the mildew.


2) Mild dry heat discourages mildew. Use dehumidifiers or leave a light bulb turned on in areas where the fungus is most likely to breed (sorry, it must be an incandescent bulb to create heat)


3) Mildew thrives in plastic. Remove clothing from plastic drycleaning bags immediately! There are other reasons not to store clothing in plastic, but this should be enough!


4) Mildew needs dirt or dust to survive. Check your clothes for spots/stains every time you hang them up. Clean your clothes anytime you do not plan on wearing them for a while.


5) Clothes need to breath. Keep about an inch between your clothes (don't cram them in - that will create wrinkles anyway). Keep your closet door open or ajar to help with air flow. Ceiling fans are a great idea in a closet!


6) NEVER hang clothes in your closet, unless they are completely dry.


7) Stuff your shoes and handbags that you don't wear daily with a little tissue. Check the tissue when you discard it, it could be an early warning signal.


8) Position your closet well! If you are building or renovating a home, avoid using outside walls as closet walls, and avoid putting closets near or in bathrooms.


9) Opt for paint, not wall paper on your closet walls.


10) If you see mildew/mold, act early and quickly! There are many pre-bottled solutions on the market today that help to remove mildew from different surfaces. These solutions have specific instructions and should be followed carefully.


2 more notes:


DRYCLEANING CAN REMOVE MOLD. However, if you put your garments back in a storage area with spores in it, the fungus will return quickly. Drycleaning WILL NOT, however, get rid of mold damage. Often mold damages the color or material. This results in damage after drycleaning (color loss, tears, interfacing issues, etc) that wasn't there before cleaning.


OZONE can be used to eliminate the musty odor of the fungus. Not all cleaners have access to this, or even know about it. Be sure to ask for it if you are cleaning items with a musty smell.

9 comments:

John Kenly said...

All the given tips are very useful. I will follow. Hopefully my custom dress shirts are more safer after reading this.

cabinetryventuraLA said...

This is very important and that storing things the right way is very essential so that they are kept in best condition and protected from such unhealthy molds.Kitchen Cabinets Los Angeles

good2go said...

Protecting you and yours health is number one when getting rid of mold. The mold spores can be especially harmful when the bacteria from the clothing becomes aerosolized and gets into the heating and air-conditioning system of your home; and later growing into new mold colonies.

Wesley

Unknown said...

Make besides fungus flourishs in enclosed, dishonest, still terrains. Do your surpass to maximise the supervise sunlight also affectation course circa your summit, taking depressed aloft branches if probable. remove mold and mildew

Joseph Piodos said...

If you’re in doubt of any unpleasant growth in your house, you should simply assume there is a problem whenever you see mold or smell mold odors. Testing should never take the place of visual inspection (which is recommended) and it should never use up resources that are needed to correct moisture problems and remove visible growth.
People used to think that molds were harmless but it isn’t. The fact is, some molds produce a toxin called aflatoxin (toxic and among the most carcinogenic substances known) that causes illness and death in people.
Sometimes, mold growth is hidden and difficult or hard to locate and find. In such cases, carefully conducted sampling and visual inspection may help determine the location of contamination. However, mold testing is rarely useful for trying to answer questions or inquiries about health concerns. For more information, see mold testing services

jade said...

These treatments have the potential to have significant beneficial effects, Mold Testing Houston

Intern said...

Thanks for sharing, keep posting! Btw, here’s also the Dry cleaner, btw you can also visit our website https://www.cottoncare.com.sg offering services in affordable prices. Keep it up!! God bless!

Cho co said...

First of all, you should look for the right service provider to have your appliances repaired. Top Rated Dryer Repair Service in Riverside

FunGuy Mold Inspections said...
This comment has been removed by the author.